Fg Wilson Avr Suppliers – 275kVA 250kVA 200kw 230/400V 50Hz Natural Gas Generator Biogas Power Generator Gas Gensets Natural Gas Generating Set Biogas Generation Power Station – WINTPOWER

Quick Details:

Product Detail

Product Tags

Feedback (2)

While in the past few years, our organization absorbed and digested innovative technologies both equally at home and abroad. Meanwhile, our organization staffs a group of experts devoted for the advancement of fg wilson avr, mitsubishi generators dealers, generator with ats, We sincerely welcome you appear to go to us. Hope now we have fantastic cooperation during the upcoming.

Fg Wilson Avr Suppliers – 275kVA 250kVA 200kw 230/400V 50Hz Natural Gas Generator Biogas Power Generator Gas Gensets Natural Gas Generating Set Biogas Generation Power Station – WINTPOWER Detail:

Basic Info.

Model NO.

WT-NC275

Output Type

AC Three Phase

Speed

Conditions of Use

Land Use

Usage

Common Units, Standby Unit, Emergency Crew

Landuse Type of Unit

Low Noise Automation Type

Excitation Mode

AC Rotating Exciter

Genset Output

400/230V, 380/220V, 440/220V, 415/240V, 480/277V

Phase

Single or Three Phase

Frequency

50Hz/60Hz

Engine Speed

1500rpm/1800rpm

Battery Volatge

12V/24V

Aspiration Engine Type

Turbocharged

Cooling System

Water Cooled

Governing Type

Electrical Starting GAC

Compress Ratio

17:1

Voltage Regulator

AVR Auto Voltage Regulator

Voltage Regulation Maintanined

Within 0.5%

Alternator

Brushless, Self Exciting, 100% Copper

Insulation Class

Class "H"

Auto Transfter Switch

Optional ATS

Quality Standard

ISO9001, ISO14001, CE

Transport Package

Plastic Seaworth Including Wooden Package

Specification

4900x1680x2150MM

Trademark

WINTPOWER

Origin

China

HS Code

85021310

Production Capacity

8000

Product Description

275kVA 250kVA 200kw 230/400V 50Hz Natural Gas Generator Biogas Power Generator Gas Gensets Natural Gas Generating Set Biogas Generation Power Station

Genset working condition:
1.Acceptable working conditions:
Ambient temperature: -10ºC~+45ºC(Antifreeze or hot water needed for below -20ºC)
Relative humidity:<90%(20ºC), Altitude: ≤500m.
2.Applied gas:Biogas
Acceptable fuel gas pressure: 8~20kPa,CH4content ≥50%
Gas low heat value (LHV) ≥23MJ/Nm3. If LHV<23MJ/Nm3, gas engine power output will decrease and electrical efficiency will decrease. Gas doesn’t include free condensation water or free materials (the size of impurities should be less than 5μm.)
Relative humidity:<90%(20ºC), Altitude: ≤500m.
H2Scontent≤200ppm.NH3content≤ 50ppm. Silicon conent≤ 5 mg/Nm3
Impurities content≤30mg/Nm3, size≤5μm,Water content≤40g/Nm3, no free water.
NOTE:
1. H2S will cause corrosion to engine components. It’s better to control it below 130ppm if possible.
2. Silicon can appear in engine lubricant oil. High silicon concentrations in the engine oil can cause heavily wear and tear on engine components. Engine oil must be assessed during CHP operation and oil type must be decided according to such oil assessment.
Genset Specification
WINTPOWERbiogas genset data
Genset model	WTGS500-G
Standby power (kW/kVA)	500/625
Continues power (kW/kVA)	450/563
Connection type	3 phases 4 wires
Power factor cosfi	0.8 lagging
Voltage(V)	400/230
Frequency (Hz)	50
Rated current(Amps)	812
Gas genset electrical efficiency	36%
Voltage Stabilized regulation	≤±1.5%
Voltage Instantaneous regulation	≤±20%
Voltage Recovery time (s)	≤1
Voltage Fluctuation ratio	≤1%
Voltage Wave aberration ratio	≤5%
Frequency Stabilized regulation	≤1%(adjustable)
Frequency Instantaneous regulation	-10%~12%
Frequency Fluctuation ratio	≤1%
Net weight(kg)	6080
Genset dimension(mm)	450020102480
WINTPOWER-Cummins Biogas Engine Data
Model	HGKT38
Brand	WINTPOWER-CUMMINS
Type	4 stroke, water-cooling, wet cylinder liner, electronic-control ignition system, pre-mixed perfect mixed burning
Engine output	536kW
Cylinders& Arrangement	12, V type
Bore X Stroke(mm)	159X159
Displacement(L)	37.8
Compression ratio	11.5:1
Speed	1500RPM
Aspiration	Turbocharged & intercooled
Cooling Method	Water cooled by fan radiator
Carburetor/gas mixer	Huegli gas mixer from Switzerland
Air/fuel mixing	Automatic air/fuel ratio control
Ignition controller	Altronic CD1 unit
Firing order	R1-L6-R6-L1-R5-L2-R2-L5-R3-L4-R4-L3
Governor type(speed regulating type)	Electronic governing, Huegli Tech
butterfly valve	MOTORTECH
Starting method	Electric, 24 V motor
Idling speed(r/min)	700
Biogasconsumption(m3/kWh)	0.46
Oil recommended	SAE 15W-40 CF4 or above
Oil consumption	≤0.6g/kW.h
Alternator Data
Brand	WINT
Model	SMF355D
Continuous power	488kW/610kVA
Rated Voltage (V)	400/230V / 3 phase, 4 wires
Type	3 phase/4 wire, brushless, self-excited, drip proof, protected type.
Frequency (Hz)	50
Efficiency	95%
Voltage regulation	± 1 %(adjustable)
Insulation class	Class H
Protection class	IP 23
cooling method	wind-cooling, self-heat-rejection
Voltage regulating mode	Automatic voltage regulator AS440
Compliant with international standards:	IEC 60034-1, NEMA MG1.22, ISO 8528/3, CSA, UL 1446, UL 1004B on request, marine regulations, etc.
ComAp Control Panel IG-NT (Controller IG-NTC-BB connected with InteliVision Display screen)

ComAp InteliGen NTC BaseBox is a comprehensive controller for both single and multiple gen-sets operating in standby or parallel modes. The detachable modular construction allows easy installation with the potential for many different extension modules designed to suit individual customer requirements.
InteliGen NT BaseBox can be connected with InteliVision 5 display screen which is 5.7" Color TFT display screen.
Features:
1.Support of engines with ECU (J1939, Modbus and other proprietary interfaces); alarm codes displayed in text form
2.AMF function
3.Automatic synchronizing and power control (via speed governor or ECU)
4.Base load, Import / Export
5.Peak shaving
6.Voltage and PF control (AVR)
7.Generator measurement: U, I, Hz, kW, kVAr, kVA, PF, kWh, kVAhr
8.Mains measurement: U, I, Hz, kW, kVAr, PF
9.Selectable measurement ranges for AC voltages and currents – 120 / 277 V, 0-1 / 0-5 A 1)
10.Inputs and outputs confi gurable for various customer needs
11.Bipolar binary outputs – possibility to use
12.BO as High or Low side switch
13.RS232 / RS485 interface with Modbus support;
14.Analog / GSM / ISDN / CDMA modem support;
15.SMS messages; ECU Modbus interface
16.Secondary isolated RS485 interface 1)
17.Ethernet connection (RJ45) 1)
18.USB 2.0 slave interface 1)
20.Event-based history (up to 1000 records) with
21.Customer selectable list of stored values; RTC; statistic values
22.Integrated PLC programmable functions
23.Interface to remote display unit
24.DIN-Rail mount
Integrated fixed and configurable protections
1.3 phase integrated generator protections (U + f)
2.IDMT overcurrent + Short current protection
3.Overload protection
4.Reverse power protection
5.Instantaneous and IDMT earth fault current
6.3 phase integrated mains protections (U + f)
7.Vector shift and ROCOF protection
8.All binary / analog inputs free configurable for various protection types: HistRecOnly / Alarm Only
9./ Alarm + History indication / Warning / Off load /
10.Slow stop / Breaker Open&Cool down / Shutdown
11.Shutdown override / Mains protect / Sensor fail
12.Phase rotation and phase sequence protection
13.Additional 160 programmable protections configurable for any measured value to create customer-specific protections

1	WINTPOWER-Cumminsbiogas engine	Gas Engine
2	Brushless, Self-excited, Leroy Somer alternator	Alternator
3	ComAp IG-NTC-BB controller, with synchronization panel	Control system
4	Plate heat exchanger for jacket water and remote radiator for intercooler	Cooling system
5	Gas hand valve	Gas train
	Solenoid valve from Italy
	Gas flame
	Zero Pressure valve
6	HUEGLI gas mixer with MOTORTEC actuator (automatic AFR)	Mixing system
6	ALTRONIC ignition controller and MOTORTECH ignition coils	Ignition system
7	Batteries, battery charger, elbow, silencers and so on.	Genset accessories
8	Engine parts books, Generator set maintenance and operation manual	Documents
	Alternator maintenance and operation manual
	Controller maintenance and operation manual
	Electrical drawings and installation drawings.

1.Synchronization Panel
Model	KD500-SP
Capacity	1000A
Air circuit breaker brand	ABB
Controller	ComAp IG-NTC-BB
Features:
1.Automatically parallel the gen-set
2.Automatically unload the gen-set
3.Programmed start and stop gen-set
4.Gen-set monitoring and protecting
5.synchronize gensets with nationalgrid(mains)

Some of our gas generators reference projects
a.
2x500kW gas generators in Nigeria, installed in October of 2012.

A.STANDARD SUPPLY:1.Brand new CCEC/DCEC, DEUTZ, DOOSAN, YUCHAI, KUBOTA, RICARDO, YANGDONG, water cooled diesel engine.2.Brand newSTAMFORD, LEROY SOMER or WINTsingle bearing 3 phase brushless alternator with 100% copper, IP23 and H insulation class.3. Standard 50ºC radiator with safety guard, engine driven fan mounted on skid4. DEEPSEA, COMAP, SMARTGEN controller brand with Auto/Manual start and AMF function5. DELIXI, CHINT or ABBbranded MCCB circuit breaker mounted.6. Heavy-duty fabricated steel based frame with convenient lifting, forklift pockets7. Complete set mounted on a based frame with anti-vibration mountings.8. Industrial 9 dB muffler exhaust system with blexible connects and bellows.9. Based frame with fuel, oil and coolant drain cocks for easy maintenance.10. 12/24V DC electric start system with free maintaining battery & floating battery charger.11. Standard with built-in fuel tank for 8 hours running. Canopy noise levels @7 meters with 70 dB12. Test report of generator, set of drawings and manuals. CE, ISO9001 approvedΔ OPTIONAL SUPPLY: 1.Weatherproof canopy / Soundproof canopy / Trailer-mounted2.Engine / Alternator Pre-heaters3.Auto load sharing & synchronizing panel4.Build-in ATS (Auto start & stop Main Failure (AMF)5.Large 12/24 hours fuel tank6.Power output socketsΔTESTING ITEMSWintpower factory inspection: the test items before delivery are mainly as follows:1.Parts faults testing2.Fuel tank pressure testing3.Bolt tightening torque testing4.Painting thickness testing5.Voltage bearing and insulation testing6.The noise level is tested by requested7.loadingtest range 25% 50% 75% 100% 110% 75% 50% 25% 0%ΔWintpower Silent typeDiesel Generator, advantagesas follows:1. Integrated interface with humanized and practicablydesign2. Super silentmaterial and treatment reach 70dBA@1M full load3. Steel material thickness2MM to 4MM,cut and fold by CNC4. New safe door handle, updated lock, bottom forkliftand top lift5. Aviation outtake connectorad operation LED light6. Free maintenance battery with floating charger8. 8-24hoursbase fuel tank with electrical fuel indicator9. Powder coating canopies afterchemistry treatment 275kVA 250kVA 200kw 230/400V 50Hz Natural Gas Generator Biogas Power Generator Gas Gensets Natural Gas Generating Set Biogas Generation Power Station ΔFAQWhat’s your power range of Generators?Answer:We can offer the range from 5kva~3000kva.2.What’s your delivery time?Answer:Generally,we can delivery in 15-35days after confirmation of order.3.What’s your payment?Answer: We can accept T/T 30% in advance, and the balance 70% shall be paid before shipmentor L/C at sight.But based on some special project and special order,we can do somethingsupporton payment item.4.What’s your warranty?One year or 1000hours (accordingto whichever reach first) from Ex-Factory date5.What’s your MOQ?Answer:We accept power generator MOQ is 1set .ΔWINTPOWER Service SystemCustomer-focused traditional service better and better service levels worldwide-network ServiceConcepts:Ensure that customers at ease using for WINTPOWERProducts Serving the customers, WINTPOWERgains trust .Work together with Customers During the service period, WINTPOWERdo best firstly and protects customers’interests.In case of failure to use the generator, WINTPOWERhelp customer untilthey know how to useΔWINTPOWER Service PrinciplesCustomer foremost and honesty as foundation. Serving the customers heart and soul at all levels 24 hours each day.